The Newest In Carbide Endmill Configuration In A Extensive And Successful Line From Iscar

Manufacturers and die & mold shops can banish chatter problems in numerous milling operations with Iscar's revolutionary Chatterfree carbide endmill. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the principal source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling. In addition, users also report prolonged edge life due to reduced chatter. The chatter-free function is attainable in both solid carbide endmills and tips in Iscar's MULTI-MASTER replaceable-tip family. Diameter range is 6 to 20mm for the solid carbide endmills, and 8 to 20mm for MULTI-MASTER tips. These brand new endmills are excellent for low power machines with ISO40 or BT40 adaptations. The solid carbide variant can handle full slot machining up to 2xD. Depth capability on the replaceable-tip version is more restrained since the active length is shorter. In full slotting operations on alloy steel, the solid carbide variant successfully handles 0.03-0.05 feed rates at 180-220mm/min surface speed and 2xD depth of cut.

FINISHRED - Revolutionary Solid Carbide Endmills

Iscar is introducing the EFR.. B44 and the MM EFS.. Finishred a unprecedented solid carbide endmill family. The Finishred carbide endmill is a combination of both roughing and finishing endmills in a single tool. Roughing endmills remove material from work pieces more swiftly and efficiently than conventional endmills. Nonetheless, roughing endmills leave grooves on the machined surface. Hence, after using a roughing endmill, a finishing endmill must to be used in order to obtain a flush surface finish. This means time-consuming tool change, setup time and necessity of maintaining 2 endmill types in the stock.

Features of the Finishred Endmills:

The EFR.. B44 and the MM EFS.. endmills feature four flutes with 45 degree helix, two serrated flutes and two continuous flutes.

The cutting edges of the finishing flutes are radially farther from the tool axis than the cutting edges of the serrated flutes. The finishing flutes eliminate the grooves caused by the roughing flutes, leaving a fine surface finish.

The tool is fully efficient and enables running at rough machining parameters, resulting in finish surface quality.

The exceptional tool design reduces vibration at high load applications.

The tool creates short and long chips simultaneously. This chip mixture is evacuated more easily than each individual chip type, an exceptional solution in slotting and cavity milling applications.

The Finishred is also offered with the Multi-Master indexable milling head option which couples the Finishred includes with the advantage of little setup time, no regrinding costs and the broad range of shank and extension options are available for the Multi-Master milling heads.

A single tool substitutes the roughing and finishing endmills; therefore reducing stock.

Tool change and setup time can be eliminated.

An extra tool position is acquired on the machine

New Chip Splitting Solid Carbide Endmills for Elevated Metal Removal Rates

ISCAR is establishing the ECP-3/4L family of chip splitting endmills. The revolutionary endmills are accessible with 3 and four 38 degree flutes in grade IC900. They feature 2xD and long shanks with diminished neck diameter, which enable machining along high shoulders, at high feeds. These endmills, due to their chip splitting feature and force distribution can be used very efficiently on reduced power machines (CAT40/BT40/ISO40). The serrated cutting edge includes flat peaks which leave a better surface finish, in relation to the current rougher carbide endmill. The ECP endmills are advocated for machining austenitic and martensitic stainless steel, at up to 2xD depth of cut. They can be used on alloyed steel as well. All of the introductory tests conducted at various customers' locations showed extraordinary results.

Brand New Cutters And Carbide Insert Shapes From Iscar To Better Maximize The Machining Procedure
Iscar is introducing Penta 34 carbide inserts with a new PB chipformer. The PB chipformer features a single cavity with a positive rake, neutral shoulder angle, and a honed edge. It is actually a C-type chipformer with a different frontal edge.

Iscar Recently Made Public Numerous Brand New Lines To Continue Their Family Of Milling Tools
Iscar recently released a new family of High Speed Milling adjustable endmills and facemills that will improve milling of aluminum, non-metallics, cast iron and hardened steel. This should prove especially useful in the automotive and aerospace industries.

Some Of The Several Advancements In Carbide Inserts From Iscar Over The Last Decade
Iscar is introducing a new unique milling system with tangential, clamped, butterfly-shaped LNKX carbide inserts. The butterfly-shaped insert has significant advantages compared to the current flat, square shapes. The new geometry has more cutting edges, positive rake face, reduced cutting forces resulting in higher performance.

Iscar Releases A New Family Of Slitting Cutters Using Tang-Grip Technology And The Sturdiness Of Sumo Tec Grades
Iscar now offers a family of high-performance slitting tools that combine the convenience and security of Tang-Grip clamping with the added durability of the new Sumo Tec insert grades. The concept, already proven successful in Tang-Grip parting tools, has now been extended to slitting cutters.

A Number Of Advancements Have Increased Iscar's Families Of Indexable Endmills For Elevated Productivity
Helido-Upfeed 04 Two years ago Iscar introduced the extremely efficient H600 indexable endmill line, based on conceptually new Helido-Upfeed double sided inserts with 6 cutting edges. The first insert launched was the H600 WXCU 0806..., which was designed for milling cutters in the diameter range of 50 to 125 mm.

Push Pull Testing For Building Industry Supplying Calibrated Gauges. Mechanical Load Testing Methods For On Site Evidence To Testing Demands.
Push Pull Testing for the Railway industry for proof of reliable anchor fixings. Calibrated push pull force gauges are used for stress load testing along with tensile strength pull testing procedures. Proof of load testing undertaken, measured, recorded in a reliable and standard way to BS5080 Part 1 standards.

Commercial Water Heater- Which Is Right For Your Requirements
If you are in the market for a commercial water heater then consider what the needed application is and your overall cost to determine which is best for you. Since there are so many to choose from you may have to do some calculating in order to match the need.